Extension ring -electric power fitting M16 manufacturer from China Tele-power Co.,LTD

Price:	1.0~2.0 USD
Payment Terms:	T/T,L/C,WU;as you like
Place of Origin:	Hebei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: M16

Production Capacity: 100000

Delivery Date: 7days

surface treatment: hot-dip galvanized

technology: cut ,press,

size: according your draw

export to: all over the world

Advantage: competitive price

Means of Transport: Ocean,Land,Air;as you like

Packing: wooden box

Material: steel Q235

zinc thickness: 86um

color: silver

used with: tie strap

certificate: ISO9001

1.Extension ring -electric power fitting
2.Hot-dip galvanized steel Q235
3,used on overhead line ,with tie strap
4.export to all over the w

1.Drawing and Specification :

Type	Main dimensions(mm)			Devastating Load(kN)
Type	C	d	L	Devastating Load(kN)
PH-7	20	16	80	70
PH-10	22	18	100	100
PH-12	24	20	120	120
PH-16	26	22	140	160

2.electric power fitting Dimensions:

The dimensions on the drawings are the final dimensions after the hot dip galvanization. The design of the fittings is indicative; however the mentioned dimensions on the drawings are the critical ones.

electric power fitting GALVANIZATION

The fittings shall be delivered hot dip galvanized according to the following specifications:

· The Zinc of the electric power fitting that shall be used shall have the quality of minimum category prime western according to the category Zn 98.5 according to ISO-1461.

· Then washed out with water and then flux treated and dried out.

· The hot dip galvanization shall be made in a Zinc bath of temperature 450°C and of Zn-composition min. 98,5%.

· The galvanization thickness of the electric power fitting shall be in average 80m thick! On an isolated piece or on a small part of the surface the thickness can be a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78μm and the average weight in relation to the galvanized area shall be 610 gr/m2.

· The pieces of the electric power fitting shall be after HDG free from black stains, enclosures of dirt, knobs, bubbles or any other surface defects. The HDG shall be smooth and uniform in the entire piece without any spots with too small or too big galvanization thickness otherwise the pieces will be rejected.

· The galvanization shall stick very well on the steel structure; it shall not be removed as a film but shall be as one with the steel body